常州市森茂機械設備有限公司
已認證
常州市森茂機械設備有限公司
已認證
ZLPG 系列中藥浸膏專用噴霧干燥機
ZLPG Series Spray Dryer for Chinese Traditional Medicine Extract
◆
該機采用全封閉形式,配有三級凈化裝置,過濾后的空氣達十萬級要求。筒體裝有冷壁裝置,使壁溫<80℃,物料在壁上停留不會有焦化變質現象,大大增加了收粉率(達95%以上),而且不會產生混藥現象和粘壁現象。
◆
基本原理:中藥浸膏高速離心噴霧裝置是離心式噴霧干燥技術在特定物料干燥中的應用,也是利用高速離心式霧化器使物料分散成霧狀,與熱空所充分接觸,完成瞬間干燥,形成粉狀成品的干燥裝置。
◆
中藥浸膏專用噴霧干燥機是專門用來解決中藥浸膏和植物提取液的噴霧干燥機,它解決了物料在原LPG高速噴霧干燥機在中藥浸膏干燥中出現的以下情況:
.物料粘壁,收粉率低;
.物料在壁上停留時間長,產生物料的焦化變質現象;
.難以清洗,不符合GMP要求;
.產量低:LPG-150型噴霧干燥機,只能處理50-60kg/h料液。
◆
The machine adopts full seal from. It is equipped with three grades of filter. The filtered air is one hundred thousand grades.
The cooling device of wall is installed at the cylinder body. It makes the wall temperature less than 80℃. Air sweeping device is
installed inside the drying tower. The product will not be burnt or deteriorated even stays on the way. The collection rate of pow-
der is raised greatly. Moreover will not cause medicine mixed or wall stick.
◆
Basic principle: high-speed centrifuge atomizing for the extract of traditional Chinese medicine is an application of centrifuge
atomizing technique. It is an high-speed atomizing dryer. The following problems are solved.
◆
. Raw material is stick to the wall and the rate of powder collecting is low.
. Because the staying time of raw material at wall is long, the phenomenon of burnt and degeneration can be produced.
. It is difficult to clean and can not meet the requirement of GMP.
. low in output: Model LPG-150 atomizing centrifuge dryer can process 50-60 kg/h of raw material liquid.
相關產品
更多
企業名稱
常州市森茂機械設備有限公司企業類型
有限責任公司(自然人投資或控股)信用代碼
91320402MA1W5HK920法人代表
湯產法注冊地址
常州市天寧區鄭陸鎮舜南村成立日期
2018-03-06注冊資本
1,080萬(元)有效期限
2018-03-06 至 無固定期限經營范圍
干燥設備、制粒設備、混合設備的研發、制造、銷售;機械零部件制造、加工;自營和代理各類商品及技術的進出口業務,但國家限定企業經營或禁止進出口的商品和技術除外。(依法須經批準的項目,經相關部門批準后方可開展經營活動)
400-810-0069轉6577
虛擬號將在 秒后失效
使用微信掃碼撥號